Document Page: First | Prev | Next | All | Image | This Release | Search
File: 011696_103_6_016.txt
Un-l-level ljnit-lovel
.A% %ix)n a% rx)%sible-but no -%After the coating is dry- at least
longer than four lu)urs later-cican the 30 minutes but no more than 24
area ft, be paintcd with thinner, NSN h,ur.%-paint it with primer. NSN
80104X)- 181-8079. 8010-01-193-0516. Stir each compo.
nent separately until uniform. Mix the
clean with thkow two parts well, then let stand 30 n)i-
notes before you use the primcr. Don't
Apply walkway compound, NSN
561@141-7= before topcoat Brush or? topcoat
@Aficr application, the primcr will be dry hard in 30 to 90 minutes and you
can add the CARC topcoat. Use single part CARC. Stir it thoroughly, though,
before use. Here are NSN's for quart quantities:
@inimediatcly coat all barc metal Stock NSNOBIO-01-229-7540 Green383 NSNOOIO-01-@7546
ound, NSN Brown383 801"1-M7543 $and 8010-01-234-2934
8030-00-850-7076. Use a sponge to
applya thinloycr.Misprotectsthesur-
race and helps the printer bond to the save any mixed primcr overnight be- 'Me topcoat will be dry to the touch in 30 minutes. It will be dry through in
%tirracc. Keep the compound err the cause it will harden in the pot within 4 to 6 hours. lt'll be cured enough to withstand impact-like walking on it-in
stim)unding paint because it can keep 15 hours. 6 to 8 hours. Complete curing takes 7 to 14 days.
thcprinicrrmmbondingtooldpaint. Leftover Paint
und -------------------
Treat any leftover paint as HAZARDOUS
hazardous waste. @t goes too WASTE
for polyumthane component
,,n,, it it g@. bad in [he can. It
should be clear to pale yellow.
lfit'sibickencdorcrystall'n In
consistency, seW it back up and
get rid of it.
Sponge on the primer,
feathering It over the edge of the UNDLE WgH CARE
old paint
Box ID = BX000000
Unit = VII CORPS
Parent Organization = ARCENT
Folder Title = PORT OPERATIONS CARC PAINTING POLICY
Subject = ARMY REGULATION 11-34 (RESPIRATORY PROTECTION PROGRAM
Document Number = 103
Image file name = 00000100.tif
Document Page: First | Prev | Next | All | Image | This Release | Search